180mm Experimental Coating Machine Small Size Hot Melt Coating Machine
A: Overview
1.1 Applicable products: hot melt adhesive coating experiment
1.2 Glue material: Hot melt adhesive; Base material: glassine paper, coated paper, etc.
1.3 Main process: extrusion coating
1.4 Main process flow
Unwinding---coating---cooling---compounding---winding
B: Main feature
2.1 Using high-precision high-temperature alloy steel coating head, coating control accuracy and service life are greatly improved,.
2.2 Simple operation of the whole machine, semi-automatic operation, manual/automatic switching, misoperation prompt, etc.；
2.3 The heater temperature is all controlled by the data module, the temperature control accuracy is ±1°, and the stability is good.
2.4 The operation panel adopts the touch screen data system, the operation is safe, and the emergency stop safety switch is installed at each operating point of the main engine, no-load, no flying when the material is cut off..
C: Technical parameter
3.1 Coating method:Extrusion coating
3.2 Maximum coating width:180mm(Customizable)
3.3 coating amount:12-200g/㎡
3.4 Evenness: ≤±5%
3.5 Maximum mechanical speed:0.5--5m/min
3.6 All stick lengths:300mm
3.7 Unwinding maximum diameter:Both front and rear unwinding are 200 mm (can be customized)
3.8 Maximum diameter of winding:200mm(Customizable)
3.9 Unwinding device: 2 Sets
3.10 rewinding device:1 Set
3.11 Winding tension: ≤25N
3.12 Unwinding tension:≤25N
3.13 Melt glue supply device: 10㎏
3.14 Hose:2.4m(Customizable)
3.15 Maximum temperature: 230℃
3.16 Installed power:About 12kw
3.17 Power supply: ~380V 50Hz
3.18 Gas source: 0.6—0.8mpa
3.19 Water source:0.15-0.4mpa
3.20 The glue volume and the host speed are tracked synchronously, and can also be adjusted independently
D: Main configuration
4.1 Unwinding device 2 Sets
4.2 Winding device 1 Sets
4.3 Squeegee coating head 1 Sets
4.4 Coating roll 1 Sets
4.5 Composite roll and composite pressure roll 1 Sets
4.6 Drive roller 1 Sets
4.7 Transmission system 1Sets
4.8 Electrical control system 1 Sets
4.9 PLC control system 1 Sets
4.10 Heating glue supply mixing tank 1 Sets
About US
1) Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
Tablet coating machines are used to coat the surface of tablets with a thin coating of film. The film is employed mostly to: mask the colour, taste and smell of the drug. protect the drug from physical or chemical harm.
Product Tags:
|
|
180mm Experimental Hot Melt Laboratory Coating Equipment Small Size Images
|
